Difference between revisions of "Rudder"
Jump to navigation
Jump to search
| Line 32: | Line 32: | ||
!Function | !Function | ||
|- | |- | ||
|Red | | style="background: #ED1D0E;color:white;" |Red | ||
|B+ | |B+ | ||
|- | |- | ||
|Black | | style="background: #000000;color:white;" |Black | ||
|A+ | |A+ | ||
|- | |- | ||
|Blue | | style="background: #2222EE;color:white;" |Blue | ||
|B- | |B- | ||
|- | |- | ||
|Green | | style="background: #116902;color:white;" |Green | ||
|A- | |A- | ||
|} | |} | ||
| Line 53: | Line 53: | ||
!Function | !Function | ||
|- | |- | ||
|Red | | style="background: #ED1D0E;color:white;" |Red | ||
|24v | |24v | ||
|- | |- | ||
|Black | | style="background: #000000;color:white;" |Black | ||
|GND | |GND | ||
|} | |} | ||
| Line 68: | Line 68: | ||
!Function | !Function | ||
|- | |- | ||
|Red | | style="background: #ED1D0E;color:white;" | Red | ||
|5-24v | |5-24v | ||
|- | |- | ||
|Black | | style="background: #000000;color:white;" | Black | ||
|GND | | GND | ||
|- | |- | ||
|Green | | style="background: #116902;color:white;" |Green | ||
|50k Temp | |50k Temp | ||
|- | |- | ||
|Yellow | | style="background: #CDDB00;" |Yellow | ||
|Pulse out | |Pulse out | ||
|- | |- | ||
|Red and Blue | | style="background: #EE2266;color:white;" | Red and Blue | ||
|TDS sensor | |TDS sensor | ||
|} | |} | ||
Latest revision as of 08:42, 11 November 2025
The motor currently in use in the rudder is the Lehner 30100/12 with a NTC Temp. Sensor (B 25/100 3988 ±1%) installed. There is also a magnetic encoder placed behind the motor.
Rudder-controller
To accommodate the new rudder design and its features, a controller is needed. With this controller we want to enable a multiple of functionalities that will help with the integrate cooling system and the control of the back-foil.
The design should therefore have the following requirements:
| Feature | Description | Electrical connections | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Power | Power will be coming from the CAN-bus
It is important that the inrush of the connected motors must not decrease the CAN-bus voltage. |
4-pins connector that hosts the CAN-bus and Power | ||||||||||||
| Communication | The board will use the CAN-bus to communicate and retrieve commands | 4-pins connector that hosts the CAN-bus and Power | ||||||||||||
| Back-foil control | A TMC2209 or comparable is needed that supports StallGuard™ | Available on the platform connected to the back-foil motor | ||||||||||||
| Back-foil motor | The Nema 11 Stepper motor fits the rudder design to control the back-foil. | 4-pins connector for power and control
| ||||||||||||
| Water pump | The available waterpump: ZC-A210(24 V version) | 2-pins connector
| ||||||||||||
| Flowmeter | We have 2 flowmeters for inlet and outlet: DWS-MH-02 | 6-pins connector
| ||||||||||||
| Platform | Right now(10-11-2025) the Duet 3 1LC is available to use for prototyping.
Other options are EBB 36 and SHT36 with TMC2209 |
Host listed connections above. |